IBM Power S1112
IBM Power S1112: entry-level Power11 server as 2U rack or tower — up to 512 GB DDR5, IBM i in the P05 tier alongside AIX and Linux.

Key Features
- Entry-level Power11: 2U rack or deskside tower
- Up to 512 GB DDR5 DDIMM memory
- Up to 12.8 TB NVMe storage
- IBM i in the P05 tier (up to 4 cores and 64 GB) alongside AIX and Linux on the same server
- Quantum-safe cryptography, secure boot, cryptographic inventory
Table of Contents
Why IBM Power S1112?
IBM Power S1112 is an entry-level Power11 server that IBM positions for modernising AIX, IBM i and Linux workloads and for extending the Power platform to places without a full data centre: branches, remote sites and near-edge locations. It comes as a 2U rack or deskside (tower) system, so it also fits in an office, a shop or a factory.
Licensing decides the choice of this model more often than performance. IBM supports IBM i environments in the P05 software tier (up to 4 cores and 64 GB of memory) on the S1112, while the remaining server resources can run AIX, Linux and AI workloads at the same time. For companies running a small IBM i application, that means moving to Power11 without stepping up a tier.
Combining IBM i with other systems on one small machine also has security consequences. We return to this further down.
How does it work?
Core performance
IBM states that the S1112 delivers 2x better core performance than the Power S914 and 3x better than the Power S814 — based on published CPW results for 4-core configurations (IBM footnotes, valid as of 14 July 2026). Higher core performance means an application can be served without increasing the number of licensed cores.
Memory and storage
- up to 512 GB of DDR5 in DDIMM modules
- up to 12.8 TB of NVMe storage for local data
Virtualisation and reliability
Firmware-level virtualisation runs IBM i, AIX and Linux in separate partitions on one server. The S1112 benefits from the Power platform’s reliability, availability and serviceability (RAS) mechanisms.
Key features
Security
- Embedded quantum-safe cryptography
- Secure boot and cryptographic inventory
- Hardware-based encryption tools
AI at the edge
- On-chip Matrix Math Acceleration (MMA)
- AI inferencing close to the data, with low latency, without sending it to the data centre
Flexible installation
- 2U rack version for a server cabinet
- Deskside version for an office or a room without a rack
Specifications
| Processor | Power11 |
| Form factor | 2U rack or deskside tower |
| Memory | up to 512 GB DDR5 DDIMM |
| Storage | up to 12.8 TB NVMe |
| IBM i | P05 tier (up to 4 cores and 64 GB) |
| Machine types | 9242-21B, 9242-21T |
| Operating systems | AIX, IBM i, Linux |
IBM does not publish the maximum S1112 core count on the product page — available configurations are confirmed against IBM’s offer when sizing the server.
For whom?
- Companies with a small IBM i environment that want to stay in the P05 tier
- Branches, retail, manufacturing and banking locations — IBM names these sites explicitly
- Replacing older Power S814 and S914 servers — the systems IBM compares S1112 core performance against
- Mixed environments — IBM i alongside AIX or Linux on one machine
A small machine, several systems
An entry-level server running IBM i, AIX and Linux in separate partitions is in practice a small data centre in one box — often placed where nobody works on security full time.
- One console for everything. Whoever manages virtualisation affects every partition. Rights to the management layer are worth separating from the rights of individual system administrators.
- Different patch cycles. IBM i, AIX and Linux each have their own patch calendars. With a single server it is easy to assume “somebody is doing it” — agree who patches which system and the firmware.
- Physical access. The deskside version ends up in offices and back rooms. Physical access bypasses most logical controls.
- An off-site copy. If the backup sits next to the server, fire, theft and ransomware take both.
We scope controls to the size of the environment as part of security audits.
FAQ
How does the S1112 differ from the S1012? The S1112 is a Power11 server, the S1012 is Power10. The S1112 takes up to 512 GB of memory; the S1012 up to 256 GB.
How does the S1112 differ from the S1122? The S1122 is a 2U rack server with up to 60 cores and 4 TB of memory. The S1112 is an entry-level model with up to 512 GB of memory, also available as a tower.
Can I run IBM i together with AIX or Linux on the S1112? Yes. IBM i runs in the P05 tier (up to 4 cores and 64 GB), and the remaining server resources can serve AIX, Linux and AI workloads.
How many cores does the S1112 have? IBM does not publish the maximum core count on the product page. IBM’s performance comparisons refer to a 4-core configuration.
Is the S1112 suitable for AI? IBM positions it for AI inferencing at the edge, close to the data — thanks to on-chip MMA acceleration.
How does nFlo help? We help with configuration sizing (including for the IBM i licence tier), deployment and migration from older Power servers.
Technical data: IBM Power S1112, IBM Power family, IBM Power11 documentation (as of September 2026).
Inquire about IBM Power S1112
Contact your product specialist and get a custom quote.

Related Services
Our services supporting the implementation and management of this solution
IBM Power Services
IT Infrastructure
Maintain critical IBM Power systems: administration, migrations and high availability. Specialists with 20+ years of market experience.
Comprehensive IBM i (AS/400) Services
IT Infrastructure
Maintain IBM i system stability without costly migration. Administration and modernization from specialists with 20+ years experience.
Server Infrastructure Implementation and Optimization
IT Infrastructure
Match servers to actual needs. Stop paying for capacity nobody uses.
IT Infrastructure Management Automation
IT Infrastructure
Save 500+ hours per year by eliminating manual tasks. Ansible, Terraform, PowerShell.
From Our Knowledge Base
Articles related to this solution
CVE-2026-107331: Path Traversal in IBM DataStage on Cloud Pak for Data 5.4
Security Alert - CVE-2026-107331 (IBM DataStage on Cloud Pak for Data 5.4.0.0). CVSS: 9.9 (critical). Absolute path traversal by an authenticated attacker; fixed in 5.4 patch 8.
CVE-2026-123218: Authorization Bypass to Admin in IBM Aspera Faspex
Security Alert - CVE-2026-123218 (IBM Aspera Faspex 5.0.0–5.0.19). CVSS: 9.8 (critical). Authorization bypass grants full administrative privileges; fixed in 5.0.19 PL1.
IBM API Connect: 47 Critical Vulnerabilities (CVE-2026-17360 and Others) — RCE, SQLi, Auth Bypass
Security Alert - CVE-2026-17360 and 46 other CVEs in IBM API Connect 10.0.8.0–10.0.8.12 and 12.1.0.0–12.1.1.2. CVSS: 9.0–9.9 (critical). Fixes: 10.0.8.13 and 12.1.1.3.
Related Products
Other solutions you might be interested in
AdRem NetCrunch
AdRem Software
AdRem NetCrunch: agentless network and IT infrastructure monitoring. 680+ monitoring targets, automatic L2 topology maps.
baramundi Management Suite
baramundi
baramundi Management Suite: UEM platform with patch management for 200+ applications. IT automation, MDM, inventory. German manufacturer.
baramundi Proactive Hub
baramundi
baramundi Proactive Hub: a cloud platform for digital employee experience analysis, vulnerability risk prioritisation and endpoint remediation.
Citrix DaaS
Citrix
Citrix DaaS: Desktop as a Service with cloud management. HDX protocol, multi-cloud resources, auto-scaling, subscription model.
Want to Reduce IT Risk and Costs?
Book a consultation - we respond within 24h
Or download free guide:
E-book: Digital Resilience Strategy 2026