Skip to content
Cybersecurity

Professional WiFi Penetration Testing

47% of companies have WiFi vulnerabilities allowing full access to corporate network. We test WPA2/WPA3, guest isolation, rogue AP, evil twin. Find vulnerabilities before an attacker in the parking lot exploits them.

Describe your scope — your account manager will reply within 24 hours.

  • Custom quote
Sales Representative
Łukasz Gil

Łukasz Gil

Sales Representative

What is Professional WiFi Penetration Testing?

Professional WiFi Penetration Testing simulates real-world wireless attacks — WPA2/WPA3 cracking, evil twin access points, rogue AP detection, and guest-to-corporate network isolation testing — performed from outside the building, exactly as an attacker in a parking lot would operate. nFlo's OSWP-certified testers deliver a full site survey, signal coverage heatmap, and prioritized remediation recommendations; 47% of companies have critical WiFi vulnerabilities that can give an external attacker direct access to the corporate network.

WPA2/WPA3 Testing
All standards
Evil Twin Detection
Rogue AP scanning
OSWP Certified
Wireless experts

Contact your account manager

Discuss Professional WiFi Penetration Testing with your dedicated account manager.

Sales Representative
Łukasz Gil

Łukasz Gil

Sales Representative

Response within 24 hours
Expert consultation
Custom quote

Providing your phone number will speed up contact.

Attacker sits in parking lot and has access to corporate network

47% of companies have critical WiFi security vulnerabilities

Comprehensive wireless network security analysis

Wireless Recon

Mapping all networks and APs

Attack Simulation

Evil twin, WPA cracking, KARMA

Isolation Testing

Guest/corp segmentation verification

Data Theft Through Guest WiFi

Without WiFi security testing:

  • No isolation between guest and corporate network
  • Weak WPA2 passwords vulnerable to offline cracking
  • Unauthorized access points (rogue AP) connected by employees
  • Vulnerability to evil twin and credential harvesting attacks

We Test Like an Attacker From the Parking Lot - No Physical Access Needed

We don’t need to enter the building. We test everything that can be done from outside - just like a real attacker sitting in a car in front of the building.

What you get:

  • Map of all WiFi networks in range (SSID, channels, signal strength)
  • Rogue access point identification (unauthorized APs)
  • WPA2/WPA3 password strength tests (offline cracking)
  • Evil twin attack simulation (fake WiFi with same SSID)
  • Guest/corporate network isolation verification
  • Client isolation tests (can guests see each other)
  • Captive portal bypass testing
  • WPS vulnerability analysis (if enabled)
  • Signal coverage heatmap (where WiFi extends beyond building)
  • Report with prioritized recommendations

Who Is It For?

This service is for you if:

  • You provide WiFi to guests and want to ensure they’re isolated
  • You’re concerned about attacks from parking lot or neighboring offices
  • You want to detect rogue access points connected by employees
  • You need to verify WiFi security policy implementation

On-Site Wireless Penetration Test — Scope, Enterprise Networks and Pricing

An on-site wireless test is carried out where the radio signal actually reaches: from the parking lot, the building’s surroundings and neighbouring premises — the places an attacker would use. Before we start, we agree the scope with you: which networks, access points and locations are covered. That matters for more than the budget. NIST SP 800-153 warns that active wireless scans must not accidentally hit devices owned by other organizations within range, so the networks under test have to be identified first.

What the on-site test covers:

  • Rogue access points. NIST SP 800-153 describes an access point set up to look like part of the organization’s WLAN as a backdoor into the wired network that bypasses perimeter defenses such as firewalls. We identify unauthorized APs, check whether they are connected to the corporate network and locate them physically.
  • Evil twin against WPA2/WPA3-Enterprise. In Enterprise mode, users log in with their own credentials through IEEE 802.1X and EAP instead of a shared password. The weak point is often the device, not the protocol: NIST SP 800-97 points out that clients are commonly set to trust a certificate from any certification authority they recognize, so a fake network with the same SSID can pose as the real one and collect login credentials. The test shows whether your laptops and phones accept only your own authentication server and the CA that issued its certificate.
  • WPA2 and WPA3. Passphrase strength (offline cracking), WPS, downgrade from WPA3 to WPA2 and Dragonblood vulnerabilities. According to the Wi-Fi Alliance, WPA3-Personal gives better protection against password guessing — which is why we check whether your network can be pushed back to WPA2.
  • Guest and client isolation and the captive portal — whether a guest can reach corporate resources or other guests’ devices.

Testing takes 3-5 business days, and deauthentication and evil twin attacks run in a time window agreed with you.

How a wireless pentest is priced. We prepare a quote once the scope is set. The quote depends on the number of locations and buildings, the number of SSIDs and whether they run in Personal or Enterprise mode, whether an internal test after authentication is added to the external one, and when the disruptive attacks have to run. Send us these details through the contact form and we will come back with a scope and a quote.

Test Scope

What We Test

1. Wireless Site Survey

  • Mapping all SSIDs in range
  • Channel and signal strength identification
  • Detecting overlapping networks
  • Coverage analysis (where signal extends beyond building)

2. Rogue Access Point Detection

  • Unauthorized AP identification
  • Detecting APs connected to corporate network
  • Physical location of rogue AP (triangulation)

3. WPA/WPA2/WPA3 Security Testing

  • Password strength analysis (dictionary, brute-force offline)
  • WPS tests (Pixie Dust, PIN brute-force)
  • Downgrade attacks (WPA3 → WPA2)
  • Dragonblood vulnerabilities (WPA3)

4. Evil Twin Attacks

  • Fake WiFi simulation with identical SSID
  • Credential harvesting through captive portal
  • Man-in-the-middle attack simulation
  • SSL strip testing

5. Client Attacks

  • Deauthentication attacks
  • KARMA attacks (auto-connect exploitation)
  • Client isolation testing
  • Packet injection

6. Network Segmentation

  • VLAN isolation verification (guest vs corporate)
  • Access tests to corporate resources from guest WiFi
  • Firewall rules verification
  • Access control testing

7. Captive Portal

  • Bypass techniques
  • Session hijacking
  • DNS tunneling
  • MAC spoofing

Methodology and Tools

We use professional tools and methodology:

  • Aircrack-ng suite - WPA cracking, packet injection
  • Wifite2 - automated wireless attacks
  • Reaver/Bully - WPS attacks
  • Hostapd-wpe - evil twin setup
  • Ekahau - professional site survey

Learn more about key concepts related to this service:

How we work

Our proven service delivery process.

01

Site Survey

Mapping all WiFi networks in vicinity

02

Rogue AP Detection

Identifying unauthorized access points

03

Security Testing

WPA2/WPA3, evil twin, deauth tests

04

Segmentation Check

Guest/corporate isolation verification

05

Report

Documentation with coverage map and recommendations

Benefits for your business

What you gain by choosing this service.

Closed Backdoor

Block parking lot access to corporate network

Rogue AP Detection

Identify unauthorized access points

Secure Guests

Guests don't have access to corporate resources

Policy Compliance

Verify WiFi policy implementation

Frequently Asked Questions

Common questions about Professional WiFi Penetration Testing.

Do WiFi tests require access to our office?

We test like a real attacker - from outside the building, without physical access. We check what can be done from the parking lot or neighboring premises. On request, we also conduct internal tests (post-authentication).

How long do WiFi penetration tests take and what do I receive in the report?

Tests take 3-5 business days. The report includes a map of all WiFi networks in range, a list of rogue APs, WPA2/WPA3 test results, guest/corporate isolation assessment, a signal coverage heatmap and prioritized remediation recommendations.

Won't the tests disrupt our WiFi network?

We agree on the scope with you before testing. Deauthentication and evil twin attacks may briefly affect connections - we conduct them in an agreed time window or outside peak hours.

We have WPA3 - is our WiFi secure?

WPA3 is significantly more secure than WPA2, but attack vectors still exist: Dragonblood vulnerabilities, downgrade attacks to WPA2, rogue APs, guest network segmentation issues. We test all these scenarios.

How is an on-site wireless penetration test priced?

We quote after agreeing the scope, because the effort depends on it: how many locations and buildings are covered, how many SSIDs there are and whether they use Personal or Enterprise (802.1X) authentication, whether we test only from outside or also after authentication, and whether deauthentication and evil twin attacks have to run outside business hours. The test itself takes 3-5 business days. Contact us with these details to receive a scope and a quote.

Want to Reduce IT Risk and Costs?

Book a consultation - we respond within 24h

Response in 24h Custom quote No obligations