Skip to content
Knowledge base Updated: February 5, 2026

The invisible enemy in your factory: How to secure physical access, service technicians' laptops and USB drives?

Your CISO presents reports to management showing thousands of blocked attacks on the firewall and feels the situation is under control. Meanwhile, the real threat has just entered the factory floor in the bag of an outside service technician. An infected laptop, a flash drive with an

In strategic cyber defense planning for industrial environments, most of the focus is on threats coming from the network. The focus is on strengthening firewalls, protecting against attacks from the Internet and securing remote access. All of this is absolutely crucial, but it creates the risk of a “blind spot” in our perception. By focusing our eyes on the horizon, we often fail to notice the enemy, who has long since crossed our walls and is roaming freely in the courtyard.

This “invisible enemy” is threats carried by physical means - on USB drives, on untrusted service technicians’ laptops, and even in plug-in charging phones. These are attack vectors that insidiously bypass the entire, costly perimeter defense architecture. They are invisible to reports generated by firewalls and intrusion prevention systems, yet they are one of the most common real causes of catastrophic incidents such as ransomware infections.

Managing this risk is extremely difficult because it touches the core of daily operations and requires changing the habits of people who have worked in a certain way for years. It requires the creation of clear yet vital procedures and the implementation of technology to support those procedures. Ignoring this area is like leaving an open, unguarded service gate in our digital fortress.

Shortcuts

How often is an infected service technician’s laptop the real reason for a production incident?

Although precise statistics are hard to come by because companies are reluctant to share details of incidents, post-breach analysis and expert reports indicate unequivocally: this is one of the leading vectors for initial access to OT networks. An external service technician’s laptop is a device with an extremely high risk profile. In a single week, it can be connected to networks at several or a dozen different industrial sites, each with a different, unknown level of security.

Such a laptop computer is the digital equivalent of a “patient supercarrier.” He or she can unknowingly pick up malware in one poorly protected plant and then transfer it to others, becoming a cross-infection vector. The service technician himself is most often acting in good faith and has no idea that his work tool has become a weapon in the hands of cybercriminals.

The problem is so serious that many advanced targeted attacks (APTs) were designed with this scenario in mind. Attackers, knowing that they won’t directly penetrate the defenses of a large corporation, instead compromise a smaller, less-protected service company by patiently waiting for its employee to connect an infected laptop to the network of their actual target.

📚 Read the complete guide: SOC: Security Operations Center - what it is, how it works, how to choose

Should USB be banned completely, or is it better to implement a controlled “whitelist” of devices?

When confronted with threats, the first instinctive reaction is often to try to ban USB drives altogether in an OT environment. This approach, while the safest in theory, is often unrealistic in practice and doomed to failure. Many critical maintenance operations, especially on older machines that are not connected to the network, still require the use of portable media for software updates or data ripping.

A complete ban most often leads to employees, put under time pressure and the need to complete a task, to start bypassing official procedures, creating even more Shadow IT/OT risks. A much more effective and mature approach is not to ban, but to control the use of USB media.

The strategy is based on two pillars. First, on the creation and enforcement of a “clean carrier” policy that defines what devices are allowed and what verification procedure they must pass. Second, on the implementation of “whitelisting” (whitelisting) technology, which allows the technical blocking of all unauthorized devices, allowing only those that have been previously verified and approved by the security department.

How to technically block unauthorized USB ports on key workstations?

There are a number of technical solutions that allow granular control of USB ports on Windows computers, such as HMI or SCADA stations. The simplest, though least flexible, is to disable USB ports completely in the BIOS or via group policies (GPOs) in Active Directory.

A much better solution is to implement dedicated device control software (Device Control). Such software, often a module of an advanced antivirus (EDR) system, allows us to create very precise policies. For example, we can define a rule that allows only specific, proprietary models of keyboards and mice to be connected.

The most advanced option is the aforementioned whitelisting. It involves creating a list of serial numbers of specific, verified and “clean” corporate flash drives. The policy is then configured so that only these, and no other, USB drives can be mounted on the system. Any attempt to connect a private or unknown flash drive will be automatically blocked and alerted.

How much does a dedicated, secure service laptop cost and what should it feature?

One of the most effective ways to mitigate the risks associated with third-party laptops is to implement a policy that prohibits them from connecting their own equipment to the OT network. Instead, the company should provide them with dedicated, “clean” and secure service laptops for the duration of their work.

The cost of such a laptop does not have to be high. It does not have to be the latest and fastest model. The key is its configuration. Such a computer should have a maximally “hardened” (hardening) operating system, with all unnecessary services and ports disabled. It should have installed only that software which is absolutely necessary for service work.

Advanced security software (EDR) must be installed and regularly updated on the laptop. Internet access should be strictly limited or completely blocked. After each use by an outside company, the laptop should undergo a “cleaning” and restoration procedure. The investment in several such dedicated computers is a negligible cost compared to the potential losses after an incident.

What provisions in the contract and entry procedure should apply to the third-party servicer?

Cooperation with third-party companies must be based on clear and formal rules. Each service contract should include a dedicated annex on cyber security. This annex should precisely define the duties and responsibilities of both parties.

The contract should oblige the supplier to comply with your company’s internal security policies. It should clearly define whether the service provider can use its own equipment, and if so, what minimum security requirements (e.g. up-to-date antivirus, disk encryption) it must meet. It should also include confidentiality clauses and an obligation to immediately report any security incidents on the provider’s side.

In addition to the contract, a formal entry procedure for service technicians should be established. This should include an obligation to report the visit in advance, verification of identity, and, crucially, a procedure for verifying and possibly “quarantining” equipment to be brought onto the premises.

Are there effective tools for scanning laptops and USB drives before entering the hall?

Yes, and it is a key technical element in the process of inspecting outdoor equipment. Specialized solutions are available on the market, often in the form of so-called “kiosks” or quarantine stations.

Such a kiosk is a dedicated computer, isolated from the company network, equipped with several or a dozen different antivirus engines from different manufacturers. The service technician, before entering the production floor, is required to connect his flash drive or laptop to such a kiosk. The system performs an in-depth, multi-layered scan for any traces of malware.

Only after receiving a “certificate of cleanliness” from such a kiosk can the media or laptop in question be released for use on the OT network. The implementation of such a quarantine station at the main entrance to a production area is an extremely effective and visible for all to build a safety culture.

4 pillars of protection

PillarKey ActionTarget1 Policy and ProceduresCreate and enforce “clean carrier” policies and work rules for third-party companies.Define clear and understandable rules of the game for everyone.2 Technical InspectionImplement USB port blocking, device whitelisting, quarantine stations.Technically prevent the connection of unauthorized and infected devices.3 Education and CultureRegular training for employees and communication of policies to external partners.Build awareness and vigilance in people who are the first line of defense.4 Contract provisionsIntroduce cyber-security clauses into contracts with suppliers and service providers.Formalize accountability and requirements for external partners.

How to create a step-by-step “quarantine zone” for service equipment in your factory?

Creating a “quarantine zone” or, more formally, a “secure data exchange point,” is a process that can be accomplished in several steps.

  • Choose a location: It should be a room that is easily accessible to people entering the production area, but physically isolated from key systems.

  • Prepare the hardware: Install a dedicated computer (the aforementioned “kiosk”) in this room, isolated from the OT and IT network. Install scanning software on it (preferably several different AV engines) and all the necessary tools that service technicians may need.

  • Define the process: Create simple, step-by-step instructions for how to proceed. The service technician comes to the zone -> connects his media to the kiosk -> runs a scan -> if the scan is clean, he can transfer the necessary files to the company’s “clean” USB media, which is the only one he can take to the production floor.

  • Train and communicate: Inform all employees and external partners of the existence and mandatory nature of this procedure.

What is the “cyber-clean room” concept and which companies in Poland are implementing it?

The “cyber-clean room” concept is a more advanced and formalized version of a quarantine zone. It is used in organizations with the highest level of maturity, such as the military, nuclear power and advanced pharmaceuticals. It is a fully controlled, isolated environment in which all external hardware and software must pass rigorous security tests before it is allowed to be used. In Poland, a growing number of companies in the defense, energy and chemical sectors, in response to regulatory requirements, are implementing elements of this concept, creating dedicated safe zones for service companies.

How to effectively train employees not to connect private phones to control systems?

This is a classic awareness-building issue. Employees often do not realize that plugging a smartphone into a USB port on an HMI to charge it can pose a serious threat. Modern phones are de facto computers that can also be infected with malware. Training in this area must be very direct and based on simple, real-life examples. It should be explained that a USB port on a machine is not the same as an electrical outlet. It is also good practice to physically secure or blind unused USB ports on equipment on the shop floor, using the “trust but verify” principle.

Does whitelisting USB devices work on older systems such as Windows 7?

Yes. Most professional device control and whitelisting solutions also support older but still commonly used operating systems in the industry, such as Windows 7 and even Windows XP. Of course, the level of functionality and support can vary depending on the specific product, so this should be carefully verified before purchasing. However, it is a fully viable and effective solution to strengthen protection also on legacy systems for which there are no other defense mechanisms already available.

How to integrate logs from USB media connections into the central SIEM system?

Modern device control software and EDR systems have the ability to generate detailed logs on any activity on USB ports. They record such events as the connection and disconnection of a device, its type, manufacturer and serial number, as well as information on file copy attempts. These logs can and should be sent to a central SIEM system. This allows analysts in the Security Operations Center (SOC) to correlate these events with other network activity. For example, an alert about an unauthorized USB connection followed by unusual network traffic from a particular computer is a very strong indicator of an ongoing incident.

Where can I find ready-made templates and designs for “clean media” (clean media) policies?

Many organizations and industry standards make publicly available security policy templates and designs that can be adapted for your own needs. A good starting point is the free resources published by institutions such as the US NIST (National Institute of Standards and Technology) and the SANS Institute. It is worth looking for documents under the headings “media protection policy” or “removable media policy.” Keep in mind, however, that any such template must be carefully tailored to the specifics, culture and technical capabilities of your organization.

How does nFlo help implement a comprehensive strategy to protect against physical and human threats in OT?

At nFlo, we understand that protecting against the “invisible enemy” requires a holistic approach that combines hard technologies and soft processes. We help our clients at every stage of building this strategy. We start with a workshop and risk analysis, where together we identify the most critical points and processes related to physical access and mobile media use. Then, we help create and implement complete documentation - from clean carrier policies to detailed entry procedures for third-party companies. Our engineers also advise on the selection and implementation of appropriate technologies, such as USB port control systems or quarantine stations, integrating them with existing infrastructure. Finally, we support in building the most important layer of defense, designing and conducting dedicated training programs for employees and partners.


Learn key terms related to this article in our cybersecurity glossary:

  • SOC as a Service — SOC as a Service (Security Operations Center as a Service), also known as…
  • Antimalware — Antimalware is software designed to detect, prevent, and remove malicious…
  • Malware — Malware, short for ‘malicious software,’ is a general term encompassing various…
  • Security Operations Center (SOC) — Security Operations Center (SOC) is a central location where a team of security…
  • Network Security — Network security is a set of practices, technologies, and strategies aimed at…

Learn More

Explore related articles in our knowledge base:


Explore Our Services

Need cybersecurity support? Check out:


Cybersecurity for Your Industry

Learn more about cybersecurity in your industry:


See also:

Frequently asked questions

Why are service technicians' laptops such a high cybersecurity risk for factories?

A service technician's laptop may connect to multiple industrial sites in a single week, each with different security levels. It can unknowingly carry malware picked up at one site and transfer it to another, acting as a cross-infection vector that bypasses perimeter network defenses entirely.

Should USB drives be completely banned in OT environments?

A complete ban is often impractical because many critical maintenance tasks on older equipment still require portable media. A better approach is implementing a controlled whitelist of approved devices combined with mandatory scanning of all media before use.

How can USB ports be technically blocked on OT workstations?

USB port access can be controlled through endpoint management software that enforces device whitelisting policies. This allows approved devices to connect while blocking unregistered ones. Group Policy settings and dedicated USB control solutions are common implementation methods.

What should a contract with an external service provider include regarding cyber security?

Contracts should require technicians to use company-approved or pre-scanned laptops, prohibit connecting personal devices to OT systems, mandate compliance with the facility's security procedures, and include provisions for liability in case an incident is traced to the vendor.

What is a quarantine zone for service equipment and how does it work?

A quarantine zone is a designated area where external service equipment is scanned and verified before it is allowed into the production floor. It typically includes a scanning workstation with updated OT-aware security tools and a documented check-in procedure for all visiting technicians.

Share:

Talk to an expert

Have questions about this topic? Get in touch with our specialist.

Sales Representative
Grzegorz Gnych

Grzegorz Gnych

Sales Representative

Response within 24 hours
Expert consultation
Individual approach

Providing your phone number will speed up contact.

Want to Reduce IT Risk and Costs?

Book a consultation - we respond within 24h

Response in 24h Custom quote No obligations